Environmental information
2016/08/03

(一)Basic information

Unit name: Haimen General Lithium Corporation

Organization code:79088474-3        

Legal representative: Li Nanping

Production address: No. 42, Daqing Road, Qinglong Chemical Park, Sanchang Town, Haimen City

contact details: 0513-80185688

Business scope: lithium carbonate, lithium hydroxide monohydrate and its by-products (sodium sulfate, solid slag), etc.

(二)Sewage information

 

Category

Pollutant

Emission method

Number of discharge ports

Total emissionst/a

Exceeding standards

Executive Standard

Waste water

Process wastewater

Recycling

No

Domestic wastewater

Treated by septic tank and discharged into sewage treatment plant

1

4800

Three-level standard of Comprehensive Wastewater Discharge Standard (GB8978)

Organized exhaust

Dust

After being treated by bag dust collector and water film washing tower, it is discharged into the atmosphere through the exhaust port

1

12.46

For smoke and sulfur dioxide, the second level standard of "Emission Standards for Air Pollutants of Industrial Furnaces and Kilns" (GB9078); for dust and sulfuric acid mist, the second level standard of "Comprehensive Emission Standards for Air Pollutants" (GB16297)

Soot

6.34

Sulfur dioxide

After being treated by the acid mist absorption tower, it is discharged into the atmosphere through the exhaust port

1

7.85

Sulphuric acid mist

0.482

Solid waste

Gas slag

Takeaway

General industrial solid waste

Slag

Household garbage

Collected by the sanitation department

 

 

(三)Construction and operation of pollution prevention facilities

The company has built various types of pollution prevention facilities as required (see the table below for details), and established a monthly reporting system, a management system for pollution treatment facilities, and a reward and punishment system to ensure the effective operation of the environmental management system.

 

 

Category

Source of pollution

Pollutant

Governance measures

Exhaust gas

Ball milling process

Dust

Bag pulse dust collector

Rotary kiln, preparation process

Dust, Smoke, SO2

Water film desulfurization and dust removal device

Acidification process

Dust, Sulfuric acid mist

Acid mist absorption tower

Hot stove

Soot, SO2

Water film desulfurization and dust removal device

Product drying, by-product drying

Dust

Bag pulse dust collector

Waste water

domestic sewage

COD, SS, ammonia nitrogen, TP, animal and vegetable oil

Rain and sewage distribution pipe network

Septic tank

Standardized sewage outfall

Noise

Produce

Equipment operation noise

Sound insulation of equipment vibration damping base, sound insulation cover, factory building, etc.

Solid waste

Produce

General industrial solid waste

Slag dump

Coal slag yard

life

Household garbage

Domestic garbage dump

Greening

13,200 square meters, with a greening rate of 30.5%

Risk prevention measures

DCS centralized control device, PLC program control device, fire automatic alarm and fire linkage system, combustible gas detector, liquid level monitoring device and alarm, electric shock protection grounding device and safety fence, etc.

Environmental management

Set up the Ministry of Safety and Environmental Protection, equipped with 1 professional environmental protection technician

 

 

(四)Construction project environmental impact assessment and other environmental protection administrative permits

The company's existing project pollution prevention measures are constructed in strict accordance with the "three simultaneous" requirements, and in April 2009, it passed the project environmental protection completion acceptance organized by the Nantong Environmental Protection Bureau, and the approval number:Environmental inspection[2009-05]No.

 

(五)Emergency plans for environmental emergencies

A third-party professional environmental assessment agency evaluates the company's environmental risk sources and environmental risks, and gives the company's environmental impact assessment report: our company's main environmental risk material is sulfuric acid, and the largest credible accident in our company's risk assessment is determined to be concentrated sulfuric acid Storage tank leakage accident. Because our company has set up a cofferdam with a length of 18m, a width of 6m, and a height of 1.5m that has been treated with anti-corrosion and sealing around the concentrated sulfuric acid storage tank, the effective volume160m3(The volume of sulfuric acid storage tank is120 m3),It can effectively prevent the harm of concentrated sulfuric acid leakage to groundwater and soil environment, and will not affect the surrounding environment.

In December 2014, our company once again revised and improved the company's "Emergency Plan for Environmental Emergencies" according to the specifications, and after expert review, it was reported to the Nantong Environmental Safety Emergency and Accident Investigation and Disposal Center for record.32060020140081。     

The summary of the plan is as follows:

When a large amount of sulfuric acid leaks and may cause major environmental pollution, it should be reported to Haimen Environmental Protection Bureau immediately, telephone: 8226702. When a major environmental pollution accident occurs, the Nantong Environmental Monitoring Center should be immediately requested for emergency monitoring.

Sulfuric acid leakage accidents must be carried out in strict accordance with the "Emergency Disposal Procedures for Sulfuric Acid Leakage". And whether it is equipment leakage or other causes of sulfuric acid leakage or leakage accidents, they must be implemented as follows:

(1)Report that the company manufactures a manager, and report to the company's safety and environmental protection department; when the accident is serious, immediately report to the company's emergency rescue headquarters.

(2)Close the leaking single storage tank as quickly as possible (referring to the one that can be closed), if it cannot be closed, take leakage blocking measures as much as possible, and notify the relevant personnel to pay attention to evacuation.

(3)Initially confirm the amount of sulfuric acid.

(4)When handling accidents, wear personal protective equipment such as protective clothing, face shields, and acid-resistant gloves.

(5)Make full use of the emergency isolation area of the company's existing sulfuric acid tank area to prevent leakage from expanding and recover the leaked sulfuric acid for mixed acid posts; if the sulfuric acid overflows the cofferdam of the tank area, lime should be used to prevent sulfuric acid from flowing into the sewer. Once sulfuric acid flows into the sewer, the sewer outlet should be closed immediately, the accident emergency pool entrance should be opened, the sulfuric acid flowing into the sewer should be collected, and the collected sulfuric acid should be reused in the acid chemical section, or neutralized with limestone powder. The neutralized slag is used to neutralize the post.

(6)A small amount of leakage and recovery of remaining residual acid, covered with lime treatment.

(7)Purify the leakage area, collect lime slag for slurry adjustment or neutralization; and repair leakage equipment;

(8)Re-mark, store or dispose of equipment;

(9)Restore emergency measures.

The location of the sulfuric acid leakage accident may occur in the company's manufacturing department, which is responsible for the company's manufacturing department, and the equipment repair is responsible for the company's mechanical and electrical department.


————— General Lithium


————— General Lithium

© Copyright@2010-2012 Copyright General Lithium Corporation    Su ICP No. 18060914-1